Home > News > Industry News

Industry News

LED display how to be waterproofed and Moisture-proofed in rainy season

Froms:Time:2018/1/2 15:29:27Hit:1139

Qingming Festival Rain has, Ching Ming approaching, the long rainy season will also follow one after another, the phenomenon of heavy rains flooded the city will continue to staged. We know that the lamp beads of the display belong to the MSD components (humidity-sensitive devices), so this wet and wet weather is a challenge for the LED display. So how to deal with the rainy season LED display moisture into the water problem?

Indoor LED
For indoor LED display, the first things is moderate ventilation. Moderate ventilation can help the water vapor attached to the display evaporate quickly, reducing the relative humidity of the indoor environment. However, to avoid some windless and humid air weather, which will aggravate the indoor humidity; Second, putting the desiccant in indoors, physical moisture absorption approach to reduce the air moisture or open the air conditioning for dehumidification. If the display Air-conditioning installed in the space of installation, you can open the air-condition.
Outdoor LED
Because the outdoor LED display place complex environment than the indoor, indoor moisture-proof method can be taken, but the outdoor screen not only need to consider the moisture issue, but also need to daily routine maintenance, especially in the rainy season. So good sealing installation can help reduce the risk of water into the display. Clearing inside and outside the display regularly can help the display better heat dissipation, reduce the water vapor adhesion.

LED display in hot and humid areas need to open dehumidification.
Waterproofed outdoor LED display is the most important in the production and construction of the prevention. Brilliantopto outdoor products carry out protection in the production process in advance. Choosing right waterproof cabinets and professional waterproof coatings, which are anti-corrosion treatment, equipped with waterproof troughs, drainage and high-quality accessories, etc. In the construction process focusing on protection, scientific choices the sealing materials, they are truly effective waterproof moisture.


Finally, whatever indoor led display or outdoor, in order to avoid display damaging , the best way is useing it frequently. The display working will be hot and evaporate some of the water vapor, which reduces humidity greatly. It seldom makes short circuit. Brilliantopto proposal LED screen display need to work at least once a week or more in the rainy season, the screen need to work at least once a month, lighting more than 2 hours.
The treatment for water into LED display
1, Using the fastest speed with a fan or other tools, drying the screen compelely.
b, the brightness (all white) is adjusted to 30%, power aging 12 hours. e, the brightness (all white) is adjusted to 100%, power aging 8-12 hours.
To complete the above steps, LED display screen will basically return to normal; but in the process also need to pay attention to the following points:
1, Using the fastest speed with a fan or other tools, drying the screen compelely.
LED screen
2, the screen will be fully dried,then aging steps are as follows:
a, the brightness (all white) is adjusted to 10%, aging 8-12 hours.
b, the brightness (all white) is adjusted to 30%, aging 12 hours.
c, the brightness (all white) is adjusted to 60%, aging 12-24 hours.
d, the brightness (all white) is adjusted to 80%, aging 12-24 hours.
e, the brightness (all white) is adjusted to 100%,aging 8-12 hours.
Finishing the above steps, LED display screen will recover normal; but need to pay attention to in the process ,here have some points:
1, Don't put the LED screen into the flight case, it will stuffy LED's lights out.
2, When the warehouse was in water, the flight case may have water, which should be exposed to all flight case to prevent water evaporation in the LED display.
3, If you don’t handle the watered LED display immediatly, which may affect the stability of the screen. The screen body may occur death light in the emergency process.
4, All watered LED display screen in the flight case. The screen have not repairing value more than 72hours, please be cautious.

Copyright © fjjcled.com. All rights reserved. Website full technical support: KEW \ ICP备17008015号